Cisco SPS208G User Manual page 88

Statistics
802. 1 x Statistics
STEP 2
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
-
30 Sec
— Indicates that the EAP statistics are refreshed every 30
seconds.
-
60 Sec
— Indicates that the EAP statistics are refreshed every 60
seconds.
•
Received EAPOL Start — Indicates the number of EAPOL Start frames
received on the port.
•
Received EAPOL Logoff — Indicates the number of EAPOL Logoff frames
that have been received on the port.
•
Receive EAPOL Invalid — Indicates the number of unrecognized EAPOL
frames that have been received by on this port.
•
Received EAPOL Total — Indicates the number of valid EAPOL frames
received on the port.
•
Received EAP Resp/Id — Indicates the number of EAP Resp/Id frames that
have been received on the port.
•
Received EAP Resp/Oth — Indicates the number of valid EAP Response
frames (other than Resp/Id frames) that have been received on the port.
•
Received EAP LenError — Indicates the number of EAPOL frames with an
invalid Packet Body Length received on this port.
•
Received Last EAPOL Ver — Indicates the protocol version number
attached to the most recently received EAPOL frame.
•
Received Last EAPOL Src — Indicates the source MAC address attached to
the most recently received EAPOL frame.
•
Transmit EAPOL Total — Indicates the number of EAPOL frames
transmitted via the port.
•
Transmit EAPOL/Id — Indicates the number of EAP Req/Id frames
transmitted via the port.
•
Transmit EAPOL/Oth — Indicates the number of EAP Request frames (other
than Rq/Id frames) transmitted via the port.
Define the Port and Refresh Rate.
5
88