Cisco SPS208G User Manual page 179

QoS
Advanced Mode
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
Figure 80 New Class Map Screen
The New Class Map Screen
•
Add Class Map Parameters
•
Class Map Table
The Add Class Map Parameters area contains the following fields:
•
Class Map Name — Defines a new Class Map name.
•
Preferred ACL — Defines if packets are first matched to an IP based ACL or
a MAC based ACL. The possible field values are:
-
IP Based
— Matches packets to IP based ACLs first, then matches
packets to MAC based ACLs.
-
MAC Based
packets to IP based ACLs.
•
IP ACL — Defines the IP based ACL to match with packets.
•
Match — Criteria used to match IP addresses and /or MAC addresses with
an ACL's address.The possible field values are:
-
And
— Both the MAC-based and the IP-based ACL must match a
packet.
-
Or — Either the MAC-based or the IP-based ACL must match a packet.
is divided into the following areas:
— Matches packets to MAC based ACLs first, then matches
9
179