Cisco SPS208G User Manual page 169

QoS
Bandwidth
STEP 2
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
•
Committed Information Rate (CIR) — Defines the traffic rate, when CIR is the
traffic shaping type. The possible field value is:
-
For FE ports, 62 Kb - 62.5 Mb.
-
For GE ports, 62 Mb - 1000 Mb.
•
Enable Egress Shaping Rate — Configures the traffic shaping type for
egress interfaces.
Egress Shaping is performed according to the Token Bucket Algorithm.
•
Committed Information Rate (CIR) — Defines the traffic rate, when CIR is the
traffic shaping type. The possible field value is 64 Kbps to the maximum
port speed.
For 8-port devices, the Bandwidth Table displays the interfaces on multiple
screens. To browse to a specific interface entry, click the Previous, 1, 2, and Next
links above the table.
For 24-port devices, the Bandwidth Table displays the interfaces on multiple
screens. To browse to a specific interface entry, click the Previous, 1, 2, 3, and Next
links above the table.
The Bandwidth Table contains the following fields:
•
Port — Indicates the interface for which the traffic shaping information is
displayed.
•
Ingress Rate Limit — Displays the Ingress Rate Limit information. The
following information is displayed:
-
Status
— Displays the Enable Ingress Rate Limit status for the selected
interface.
-
Rate Limit — Displays the Ingress Rate Limit rate for the selected
interface.
•
Egress Shaping Rate — Displays the Egress Shaping Rate information. The
following information is displayed:
-
Status
— Displays the Egress Shaping Rate status for the selected
interface.
-
CIR
— Displays the Egress traffic shaping rate in CIR for the selected
interface.
Click Save Settings. The Bandwidth settings are saved and the device is updated.
9
169