Cisco SPS208G User Manual page 34

Setup
Time
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
•
Recurring — Specifies the time that DST starts in countries other than USA
or European where the DST is constant year to year. The possible field
values are:
•
From — Specifies the time that DST begins each year. For example, DST
begins locally every second Sunday in April at 5:00 am. The possible field
values are:
-
Day
— The day of the week from which DST begins every year. The
possible field range is Sunday-Saturday.
-
Week
— The week within the month from which DST begins every year.
The possible field range is 1-5.
-
Month
— The month of the year in which DST begins every year. The
possible field range is Jan.-Dec.
-
Time
— The time at which DST begins every year. The field format is
Hour:Minute, for example, 02:10.
•
To — Specifies the recurring time that DST ends each year. For example,
DST ends locally every fourth Friday in October at 5:00 am. The possible
field values are:
-
Day — The day of the week at which DST ends every year. The possible
field range is Sunday-Saturday.
-
Week
— The week within the month at which DST ends every year. The
possible field range is 1-5.
-
Month
— The month of the year in which DST ends every year. The
possible field range is Jan.-Dec.
-
Time
— The time at which DST ends. The field format is Hour:Minute, for
example, 05:30.
SNTP Servers
The SNTP Servers area contains information for enabling SNTP servers with the
following fields:
•
Primary Server — Indicates the IP address of the primary SNTP server.
•
Secondary Server — Indicates the IP address of the secondary SNTP
server.
•
SNTP Polling Interval — Defines the interval (in seconds) at which the SNTP
server is polled. The possible field values are
60-86400
seconds.
2
34