QoS
CoS Settings
STEP 3
STEP 4
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
Figure 71 CoS Settings Screen — CoS Port Defaults
CoS Settings Screen — CoS Port Defaults
The
•
Unit No. — Indicates the stacking member being managed.
•
Interface — Port interface to which the CoS configuration applies.
•
Default CoS — Determines the default CoS value for incoming packets for
which a VLAN tag is not defined. The possible field values are 0-7. The
default CoS is 0.
•
LAG — LAG to which the port belongs, if relevant. If the port is a member of
a LAG, the LAG settings override the port settings.
In the CoS Default Table, define the default CoS levels for the device interfaces.
Click Save Settings. The Cos Settings are modified, and the device is updated.
contains the following fields:
9
164