Cisco SPS208G User Manual page 243

Admin
Static Address
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
The Static Address Parameters area contains the following fields:
•
Interface — Displays the interface to which the address entry refers:
-
Unit No.
— Indicates the stacking member to which the address entry
refers.
-
Port — The specific port number to which the address entry refers.
-
LAG
— The specific LAG number to which the address entry refers.
•
MAC Address — Specifies the MAC address assigned to this interface.
•
VLAN ID — Displays the VLAN ID number associated with this interface.
•
VLAN Name — Displays the VLAN name associated with this interface.
•
Status — Displays defined actions for the MAC address entry. The possible
field values are:
-
Permanent
-
Delete on Reset
reset.
-
Delete on Timeout
occurs. The default timeout is 300 seconds.
-
Secure
— The MAC Address is defined for locked ports.
Define the relevant fields.
Click Add to List. The new static address entry is displayed in the Static Address
Table at the bottom of the screen.
The Add to List button adds the static address to the Static Address Table.
To modify a static address entry:
Select the address in the Static Address Table.
Define the relevant fields.
Click Update. The address entry is updated in the Static Address Table. The
device is updated.
— The MAC address is permanent.
— The MAC address is deleted when the device is
— The MAC address is deleted when a timeout
13
243