QoS
Advanced Mode
STEP 1
STEP 2
STEP 3
STEP 4
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
Figure 77 Advanced Mode Table
In addition to the Policy Settings, the Policy Table contains the following fields:
•
Trust — Displays the Trust mode attached to the rule.
•
Set Attribute — Indicates the defined Trust mode. The possible field values
DSCP
are
and
•
Set Value — Indicates the Trust value.
-
If the Trust mode is DSCP, the possible DSCP values are 0-63.
-
If the Trust mode is CoS, the possible priority values are 0-7.
•
Aggregate Policy Name — Displays the Aggregate Policer Name.
•
CIR — Displays the Ingress Committed Information Rate in kbps.
•
CBS — Displays the Ingress Committed Burst Size in bytes.
To modify policy settings:
Click QoS > Advanced Mode. The
In the Policy Table below the Policy Settings, click a policy to modify.
Define the relevant fields.
Click Update. The policy profile is defined and is displayed in the Policy Table.
CoS
.
Advanced Mode Screen
9
opens.
175