Cisco SPS208G User Manual page 152

Security Suite
IP Source Guard
STEP 1
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
To enable IP Source Guard:
Click Security Suite > More > IP Source Guard. The
opens.
Figure 67 IP Source Guard Screen
The I IP Source Guard Screen
•
Enable IP Source Guard — Indicates the use of IP Source Guard on the
device.
-
Checked
— Enables IP Source Guard on the device.
-
Unchecked
For 8-port devices, the IP Source Guard Interface Table displays the interfaces on
multiple screens. To browse to a specific interface entry, click the Previous, 1, 2,
and Next links above the table.
For 24-port devices, the IP Source Guard Interface Table displays the interfaces
on multiple screens. To browse to a specific interface entry, click the Previous, 1, 2,
3, and Next links above the table.
contain the following fields:
— Disables IP Source Guard on the device.
IP Source Guard Screen
8
152