Cisco SPS208G User Manual page 112

Network Security
TACACS+
STEP 2
STEP 3
STEP 4
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
TACACS+ Screen
The
•
Host IP Address — Defines the TACACS+ Server IP address.
•
Priority — Defines the order in which the TACACS+ servers are used. The
field range is 0-65535. The default is 0.
•
Source IP Address — Defines the device source IP address used for the
TACACS+ session between the device and the TACACS+ server.
•
Key String — Defines the default authentication and encryption key for
TACACS+ communication between the device and the TACACS+ server.
•
Authentication Port — Defines the port number via which the TACACS+
session occurs. The default port is port 49.
•
Timeout for Reply — Defines the amount of time in seconds that passes
before the connection between the device and the TACACS+ times out.
The field range is 1-30 seconds. The default is 5 seconds.
•
Status — Indicates the connection status between the device and the
TACACS+ server. The possible field values are:
-
Connected
device and the TACACS+ server.
-
Not Connected
the device and the TACACS+ server.
•
Single Connection — Maintains a single open connection between the
device and the TACACS+ server. The possible field values are:
-
Checked
— Enables a single connection.
-
Unchecked
Define the relevant fields.
Click Add To List. The TACACS+ server configuration is defined, and it is listed in
the TACACS+ Table at the bottom of the
Click Save Settings. The device is updated with the TACACS+ server
configuration.
contains the following fields:
— Indicates there is currently a connection between the
— Indicates there is not currently a connection between
— Disables a single connection.
TACACS+ Screen
7
.
112