Cisco SPS208G User Manual page 229

SNMP
Communities
STEP 2
STEP 3
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
•
Advanced Table
The Communities Parameters area contains the following fields:
•
SNMP Management Station — Defines the management station IP address
for which the advanced SNMP community is defined. There are two
definition options:
-
Define the management station IP address.
-
Select All, which includes all management station IP addresses.
•
Community String — Defines the password used to authenticate the
management station to the device.
•
Basic — Enables SNMP Basic mode for a selected community and contains
the Access Mode and View Name fields.
•
Access Mode — Defines the access rights of the community. The possible
field values are:
-
Read Only
changes cannot be made to the community.
-
Read Write
made to the device configuration, but not to the community.
-
SNMP Admin
well as permissions to modify the community.
•
View Name — Contains a list of user-defined SNMP views. The possible
values are:
-
Default
— View that defines the default group access rights.
-
DefaultSuper
administrator.
-
If additional SNMP views have been defined, they also appear in this list.
•
Advanced — Enables SNMP Advanced mode for a selected community
and contains the following field:
-
Group Name
Define the relevant fields.
Click Add to List. The new community is displayed in either the Basic Table or
Advanced Table at the bottom of the screen.
— Management access is restricted to read-only, and
— Management access is read-write and changes can be
— User has access to all device configuration options, as
— View that defines the default group access rights for
— Assigns the SNMP community to a specific group.
12
229