Cisco SPS208G User Manual page 258

Admin
Saving or Upgrading a Configuration
STEP 4
STEP 5
STEP 6
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
-
Backup Config
protection against system shutdown, or for maintenance of a specific
operating state.
•
HTTP Server — Defines the HTTP Server IP Address to which the
Configuration file is uploaded or from which it is downloaded.
•
File Name — Defines the name of the configuration file that is used for
either upgrading or backup.
If Backup is selected, the following fields are available:
•
File Type — Displays the configuration file type. The possible value is:
-
Startup Config
when the Running Configuration was saved. The Startup Configuration is
used when the system restarts or starts after shutdown.
•
TFTP Server — Defines the HTTP Server IP Address to which the
Configuration file is uploaded or from which it is downloaded.
•
File Name — Displays the name of the configuration file that is used for
either upgrading or backup.
•
Source File — Defines the file name when using the HTTP Server to load
the configuration file.
Define the required saved configuration.
•
Source File — Defines the file name when using the HTTP Server to load
the configuration file.
Define the auto configuration.
Click Save Settings. The defined configuration file modes are saved and the
device is updated.
— Contains a copy of the system configuration for
— Contains the parameter definitions which were valid
13
258