Cisco SPS208G User Manual page 60

VLAN Management
Configuring Q-in-Q
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
•
A port in Customer mode can support many users, but all the users must
belong to the same VLAN.
•
A user may be assigned to multiple ports, but all the ports must have the
same VLAN ID.
•
Uplink ports may be defined in either General VLAN mode or LAG VLAN
mode.
To configure customer VLANs:
Click VLAN Management > Create VLAN.
In the Create VLAN Screen
VLAN
).
Click VLAN Management > Port Settings.
VLAN Port Settings Screen
In the
Customer mode (see
Click VLAN Management > Ports to VLAN.
In the Ports to VLAN Screen
VLAN tags to packets passing through them (see
, create and configure a new VLAN ID (see
, define the ingress ports that operate in
VLAN Port Settings
).
, define all the VLAN Member egress ports that attach
Create
Ports to VLAN ).
4
60