Cisco SPS208G User Manual page 127

Network Security
Port Security
STEP 2
STEP 3
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
•
Enable Trap — Enables traps when a packet is received on a locked port.
The possible field values are:
-
Checked
— Enables traps.
-
Unchecked
•
Trap Frequency — The amount of time (in seconds) between traps. The
default value is 10 seconds.
Define the relevant fields.
Click Save Settings. The defined port security configuration appears in the Port
Security Table, and the device is updated.
For 8-port devices, the Port Security Table displays the interfaces on multiple
screens. To browse to a specific interface entry, click the Previous, 1, 2, and Next
links above the table.
For 24-port devices, the Port Security Table displays the interface on multiple
screens. To browse to a specific interface entry, click the Previous, 1, 2, 3, and Next
links above the table.
The Port Security Table displays the security parameters of the ports.
— Disables traps.
7
127