Cisco SPS208G User Manual page 253

Admin
Cable Test
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
Cable Test Screen
The
•
Unit No. — Indicates the stacking member on which cable tests are
performed.
•
Port — Specifies port to which the cable is connected.
•
Test Result — Displays the cable test results. Possible values are:
-
No Cable
— Indicates that a cable is not connected to the port.
-
Open Cable
cut in the middle.
-
Short Cable
-
OK
— Indicates that a cable passed the test.
•
Last Update — Indicates the last time the port was tested.
For testing on GE ports, an Advanced button opens the
Feature Screen
.
Figure 115 Advanced Cable Test Screen - GE Ports
Copper Cable Extended Feature Screen
The
•
Cable Status — Displays the cable status.
•
Speed — Indicates the speed at which the cable is transmitting packets.
•
Link Status — Displays the current link status.
contains the following fields:
— Indicates that a cable is connected on only one side or
— Indicates that a short has occurred in the cable.
Copper Cable Extended
contains the following fields.
13
253