Cisco SPS208G User Manual page 139

Security Suite
DHCP Trusted Interfaces
STEP 2
STEP 3
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
DHCP Trusted Interface Screen
The
•
Unit No. — Indicates the stacking member for which the Trusted Interface
settings are displayed.
•
Interface — Indicates the port or LAG on which Trust is enabled or disabled.
•
Trust Status — Enables or disables DHCP Snooping Trust mode on the
interface. The possible field values are:
-
Enable
— Indicates that DHCP Snooping Trust mode is enabled on the
interface.
-
Disable
— Indicates that DHCP Snooping Trust mode is disabled on the
interface.
Enable or disable the Trust Status for the relevant interfaces.
Click Save Settings. The Trusted Interfaces are defined, and the device is
updated.
contains the following fields:
8
139