Cisco SPS208G User Manual page 219

SNMP
Global Parameters
STEP 2
STEP 3
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
enabled. Select a default Engine ID that is comprised of Enterprise number
and the default MAC address, and verify that the Engine ID is unique for the
administrative domain. This prevents two devices in a network from having
the same Engine ID.
•
Use Default — When checked, uses the device generated Engine ID. The
default Engine ID is based on the device MAC address and is defined per
standard as:
-
First 4 octets — first bit = 1, the rest is IANA Enterprise number. To locate
the IANA Enterprise number refer to the Vendor web site.
-
Fifth octet — Set to 3 to indicate the MAC address that follows.
-
Last 6 octets — MAC address of the device.
The possible values are:
-
Checked
— Use the default Engine ID.
-
Unchecked
•
SNMP Notifications — Indicates if the device can send SNMP notifications.
The possible field values are:
-
Checked
— Enables SNMP notifications.
-
Unchecked
•
Authentication Notifications — Indicates if SNMP Authentication failure
notification is enabled on the device. The possible field values are:
-
Checked
— Enables the device to send authentication failure
notifications.
-
Unchecked
notifications.
Define the relevant fields.
Click Save Settings. The SNMP authentication and notification configuration is
saved and the device is updated.
— Use a user-defined Engine ID.
— Disables SNMP notifications.
— Disables the device from sending authentication failure
12
219