Cisco SPS208G User Manual page 168

QoS
Bandwidth
STEP 1
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
To define bandwidth settings:
Click QoS > Bandwidth. The
Figure 74 Bandwidth Screen
Bandwidth Screen
The
•
Interface Bandwidth Parameters
•
Bandwidth Table
The Interface Bandwidth Parameters area contains the following fields:
•
Interface — Indicates the interface for which this bandwidth information is
displayed. The possible field values are:
-
Port — Indicates the port for which the bandwidth settings are
displayed.
-
LAG
— Indicates the LAG for which the bandwidth settings are
displayed.
•
Ingress Rate Limit Status — Enables ingress rate limiting on the interface.
Bandwidth Screen
is divided into the following areas:
opens.
9
168