Cisco SPS208G User Manual page 118

Network Security
802. 1 x Settings
NOTE
STEP 2
STEP 3
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
•
Authentication Method — Defines the port's authentication method. The
possible field values are:
-
802. 1 x Only —
only. MAC addresses are ignored.
-
MAC Only —
only. 802. 1 x frames are ignored.
-
MAC & 802. 1 x—
addresses and 802. 1 x frames.
When the device sends a MAC address as the 802. 1 x user name or password to a
RADIUS server, the characters ":" and "-" are not forwarded to the RADIUS server.
Avoid defining the corresponding MAC address with ":" and "-" in the RADIUS
server.
Define the relevant fields.
Click Setting Timer. The
ports for 802. 1 x functionality.
Figure 52 Setting Timer Screen
The Setting Timer button opens the
802. 1 x functionality.
Setting Timer Screen
The
•
Unit No. — Indicates the stacking member being managed.
•
Port — Indicates the interface.
Authentication on this port is based on 802. 1 x frames
Authentication on this port is based on MAC addresses
Authentication on this port based on both MAC
Setting Timer Screen
Setting Timer Screen
contains the following fields:
opens, in which users configure
to configure ports for
7
118