Cisco SPS208G User Manual page 233

SNMP
Notification Filter
STEP 2
STEP 3
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
The Filter Parameters area contains the following fields:
•
Filter Name — Contains a list of user-defined notification filters. Filter names
with special characters cannot be used to define a filter name *,?,<,>,|,\,/
,:.
•
New Filter Name — Defines a new filter name.
•
New Object Identifier Tree — Displays the OID for which notifications are
sent or blocked. Object IDs are selected from either of the following
configuration options:
-
Select from List
-
Object ID
— Type an OID in the box.
•
Filter Type — Indicates whether informs or traps are sent regarding the OID
to the trap recipients.
-
Included
— Sends OID traps or informs.
-
Excluded — Restricts sending OID traps or informs.
Define the relevant fields.
Click Add to List. The new filter is displayed in the Filter Table at the bottom of the
screen.
The Add to List button adds the filter to the Filter Table at the bottom of the screen.
Figure 106 Notification Filter Table
— Select the OID from the provided list.
12
233