Cisco SPS208G User Manual page 256

Admin
Saving or Upgrading a Configuration
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
•
Copy — Indicates the device configuration file to copy and the intended
usage of the copied file.
If Upgrade is selected, the following fields are available:
•
File Type — Defines the configuration file type. The possible value is:
-
Running Config
on the device. This includes any configuration changes made since the
device was started or rebooted. When the device shuts down or
reboots the next time, this configuration becomes the startup
configuration.
-
Startup Config
when the Running Configuration was saved. The Startup Configuration is
used when the system restarts or starts after shutdown.
-
Backup Config
protection against system shutdown, or for maintenance of a specific
operating state.
•
TFTP Server — Defines the TFTP Server IP Address to which the
Configuration file is uploaded or from which it is downloaded.
•
File Name — Defines the name of the configuration file that is used for
either upgrading or backup.
If Backup is selected, the following fields are available:
•
File Type — Displays the configuration file type. The possible value is:
-
Startup Config
when the Running Configuration was saved. The Startup Configuration is
used when the system restarts or starts after shutdown.
•
TFTP Server — Defines the TFTP Server IP Address to which the
Configuration file is uploaded or from which it is downloaded.
•
File Name — Displays the name of the configuration file that is used for
either upgrading or backup.
If Copy is selected, the following fields are available:
•
Source File Type — Indicates the type of configuration file to copy from the
device. The possible value is:
-
Running Config
on the device, including any configuration changes made since the
— Contains the parameter definitions currently defined
— Contains the parameter definitions which were valid
— Contains a copy of the system configuration for
— Contains the parameter definitions which were valid
— Contains the parameter definitions currently defined
13
256