Cisco SPS208G User Manual page 147

Security Suite
ARP Inspection List
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
•
Delete List Name — Removes ARP Inspection lists from interfaces. The
possible field values are:
-
Checked
— Removes the specific ARP Inspection Binding List from the
selected interface.
-
Unchecked
assignments.
•
IP Address — Specifies IP addresses included in ARP Inspection Binding
Lists which are checked against ARP requests.
•
MAC Address — Specifies MAC addresses included in ARP Inspection
Binding Lists which are checked against ARP requests.
Define the ARP Inspection Binding List Name.
Add the IP address and MAC address which are validated by the ARP requests.
Click Add To List. The ARP Inspection Binding List details appear in the table at the
ARP Inspection List Screen
bottom of the
Click Save Settings. The ARP Inspection Binding configuration is defined, and the
device is updated.
To delete an ARP Inspection Binding List from the device:
In the ARP Inspection List Table, select the entry.
Click Delete. The selected list is deleted from the device.
Click Save Settings. The ARP Inspection Binding configuration is modified, and the
device is updated.
The ARP Inspection List Table contains a list of ARP Inspection Binding Lists on the
device.
— Maintains the current ARP Inspection Binding List
.
8
147