Cisco SPS208G User Manual page 100

Small business pro series ethernet switches
Hide thumbs Also See for SPS208G:
Table of Contents

Advertisement

ACL
IP Based ACL
SPS208G/SPS224G4/SPS2024 Service Provider Switches User Guide
-
Deny
— Drops packets which meet the ACL criteria.
-
Shutdown
— Drops packet that meet the ACL criteria, and disables the
port to which the packet was addressed.
Protocol — Enables creating an ACE based on a specific protocol. The
possible field values are:
-
ICMP
Internet Control Message Protoco
gateway or destination host to communicate with the source host. For
example, to report a processing error.
-
IGMP
Internet Group Management Protocol
notify their local switch or router that they want to receive transmissions
assigned to a specific Multicast group.
-
IP — IP in IP (Encapsulation) Protocol
datagram may be encapsulated (carried as payload) within an IP
datagram, and can transmit data using a tunneling method.
-
TCP
Transmission Control Protocol
communicate and exchange data streams. TCP guarantees that packets
are transmitted and received in the order they are sent.
-
EGP
Exterior Gateway Protocol
information between two neighboring gateway hosts in an autonomous
systems network.
-
IGP
Interior Gateway Protocol
exchange between gateways in an autonomous network.
-
UDP
User Datagram Protocol
transmits packets but does not guarantee their delivery.
-
HMP
Host Mapping Protocol
from various networks hosts. HMP monitors hosts spread over the
Internet as well as hosts in a single network.
-
RDP
Remote Desktop Protocol
with the Terminal Server over the network.
-
IDPR
— Matches the packet to the
Protocol. Routing protocol used to construct and maintain routes
between source and destination administrative domains.
-
IDRP
— Matches the packet to the
Specifies how routers in different domains within an OSI environment
communicate with each other.
l (ICMP). The ICMP allows the
(IGMP). Allows hosts to
(IP). A method by which an IP
(TCP). Enables two hosts to
(EGP). Permits exchanging routing
(IGP). Allows for routing information
(UDP). Communication protocol that
(HMP). Collects network information
(RDP). Allows clients to communicate
Inter-Domain Policy Routing
Inter-Domain Routing Protocol
6
(IDPR)
(IDRP).
100

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sps224g4Sps2024

Table of Contents