Table of Contents
Advertisement
mac-authentication password
This command sets the authentication password that the AP sends to the RADIUS server to
authenticate MAC addresses.
Syntax
mac-authentication password <password>
password is string of up to 30 alphanumeric characters.
Default Setting
NOPASSWORD
Command Mode
Interface Configuration (Wireless)
Interface Configuration (Wireless): VAP
Command Usage
Use this command for the default interface or any of the seven VAPs configurable per radio
interface.
Example
The following example shows setting the MAC authentication password for the default interface
and a VAP.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless a
Enter Wireless configuration commands, one per line.
RoamAbout 3000(if-wireless a)#mac-authentication password 73V3n
RoamAbout 3000(if-wireless a)#vap 6
RoamAbout 3000(if-wireless a: VAP[6])#mac-authentication password 8i9H7
RoamAbout 3000(if-wireless a: VAP[6])#end
RoamAbout 3000(if-wireless a)#
Related Commands
mac‐authentication server page A‐97
RoamAbout Access Point 3000 Configuration Guide A-99
Command Groups
Advertisement
Table of Contents
