Mac Address Allocations On The Access Point - Enterasys RoamAbout RBT-1602 Installation Manual

Table B-4 802.11g Radio Specifications (continued)
Specification
Receiver Sensitivity
MAC Addresses
Each RBT‐1602 and RBT‐1602C are assigned a unique block of 64 MAC addresses. Each radio has
32 MAC addresses and can therefore support up to 32 SSIDs, with one MAC address assigned to
each SSID as its BSSID.
An AP's MAC address block is listed on a label on the back of the AP. If the AP is already
deployed and running on the network, you can display the MAC address assignments by using
the show ap status command.
All MAC addresses on an AP are assigned based on the AP's base MAC address, as described in
Table
Table B-5 MAC Address Allocations on the Access Point
AP base MAC
Address
Ethernet Port MAC
Addresses
802.11a Radio and
SSID MAC
Addresses
802.11b/g Radio and
SSID MAC
Addresses
B-4 Technical Specifications
Description
-71 dBm @ 54 Mbps
-73 dBm @ 48 Mbps
-78 dBm @ 36 Mbps
-81 dBm @ 24 Mbps
-85 dBm @ 18 Mbps
-87 dBm @ 12 Mbps
-89 dBm @ 9 Mbps
-90 dBm @
B‐5.
• The AP has a base MAC address. All the other addresses are assigned based on
this address.
• Ethernet port 1 equals the AP base MAC address.
• Ethernet port 2 equals the AP base MAC address + 1.
• The 802.11a radio equals the AP base MAC address + 1.
• The BSSIDs for the SSIDs configured on the 802.11a radio end in odd numbers.
The first BSSID is equal to the AP's base MAC address + 1. The next BSSID is
equal to the AP's base MAC address + 3, and so on.
• The 802.11b/g radio equals the AP base MAC address.
• The BSSIDs for the SSIDs configured on the 802.11b/g radio end in even
numbers. The first BSSID is equal to the AP's base MAC address. The next
BSSID is equal to the AP's base MAC address + 2, and so on.
6 Mbps