Radio Interface
Using the CLI for the VAPs
From the global configuration mode, enter the interface wireless a command to access the 802.11a
radio interface, or the interface wireless g command to access the 802.11g radio interface. Use the
vap [1‐7] command to specify the VAP you want to configure and to enter VAP mode. Set the VAP
SSID using the ssid command and, if required, configure a name for the VAP using the
description command. Use the native‐vlanid command to specify the native VLANID for this
VAP. Enable secure access for this VAP with the secure‐access command. Set any other parameters
as required. Specify whether clients associated with this VAP can establish wireless
communications with each other through the AP with the ibss‐relay command. Specify the
maximum number of clients that can associate with the VAP using the max‐association command.
To view VAP settings, use the show interface wireless <a|g> <vap#> command.
4-58 Advanced Configuration