Table of Contents
Advertisement
Command Groups
ip https port
Use this command to specify the UDP port number used for HTTPS/SSL connection to the access
point's Web interface. Use the no form to restore the default port. Range: 443, 1024‐65535.
Syntax
ip https port <port_number>
no ip https port
port_number is the UDP port used for HTTPS/SSL. Range: 443, 1024‐65535
Default Setting
443
Command Mode
Global Configuration
Command Usage
•
If you change the HTTPS port number, clients attempting to connect to the HTTPS server must
specify the port number in the URL, in this format: https://device:port_number.
•
You cannot configure the HTTP and HTTPS servers to use the same port.
•
Configurable range restricted to 443 and 1024 through 65535. (This prevents the use of
common reserved TCP port numbers below 1024.)
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#ip https port 49153
RoamAbout 3000(config)#
Related Commands
ip https server page A‐27
A-26
Advertisement
Table of Contents
