Prompt - Enterasys ROAMABOUT 3000 Configuration Manual

Command Groups

prompt

This command customizes the CLI prompt. Use the no form to restore the default prompt.
Syntax
prompt string
no prompt
string is any alphanumeric string to use for the CLI prompt. (Maximum length: 255 characters)
Default Setting
RoamAbout 3000
Command Mode
Global Configuration
Examples
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#prompt RBTR3
RBTR3(config)#
RBTR3#configure
Enter configuration commands, one per line. End with CTRL/Z
RBTR3(config)#no prompt
RoamAbout 3000(config)#
A-20