Table of Contents
Advertisement
Command Groups
snmp-server filter
This command defines an SNMP notification filter. Use the no form to delete a filter.
Syntax
snmp-server filter filter-ID filter-type subtree-oid
no snmp-server filter filter-ID
• filter‐id is the user‐defined name that identifies this filter. Maximum length: 32 characters
• filter‐type specifies whether this filter includes or excludes messages from the specified
• subtree‐oid is a valid SNMP object identifier (OID) whose messages you want to include in
Default Setting
None
Command Mode
Global Configuration
Example
RoamAbout 3000#config
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#snmp-server filter 1 include .1.2.840.114222
RoamAbout 3000(config)#
Related Commands
snmp‐server filter‐assignments page A‐71
A-70
subtree‐oid. Options: include or exclude. Include means that notifications that are part of
the subtree will be filtered out. Exclude means that notifications that are part of the subtree
will be sent.
this filter or exclude from this filter. The string must be preceded with a period (.).
For example, .1.3.6.1.
Advertisement
Table of Contents
