Table of Contents
Advertisement
Command Groups
snmp-server community
This command defines the community access strings for SNMP. Use the no form to remove the
specified community string.
Syntax
snmp-server community string [ro | rw]
no snmp-server community string
• string ‐ Community string that acts like a password and permits access to the SNMP
• ro ‐ Specifies read‐only access. Authorized management stations are only able to retrieve
• rw ‐ Specifies read/write access. Authorized management stations are able to both retrieve
Default Setting
• public ‐ Read‐only access.
• private ‐ Read/write access.
Command Mode
Global Configuration
Command Usage
If you enter a community string without specifying ro or rw option, the string defaults to read
only.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#snmp-server community alpha rw
RoamAbout 3000(config)#
A-58
protocol. Maximum length: 23 characters, case sensitive
MIB objects.
and modify MIB objects.
Advertisement
Table of Contents
