Table of Contents
Advertisement
Command Groups
snmp-server group
This command allows you to set an SNMPv3 group profile.
Syntax
snmp-server group
Default Setting
None
Command Mode
Global Configuration
Command Usage
Users assigned to the snmp‐server group must have the same privileges.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#snmp-server group
Group Name<1-32> :RAPriv
1. NoAuthNoPriv
2. AuthNoPriv
3. AuthPriv
Select the security level<1,2,3>:[1]: 3
Write right<none,write>: none
RoamAbout 3000(config)#
A-72
Advertisement
Table of Contents
