Fitting The Boiler Jacket - Buderus Logano G215 US Installation And Maintenance Instructions Manual

7 Boiler block assembly
Secure both slotted hinge lobes with one M12 × 25
hexagon bolt each to the burner door.
Hook the burner door with the hinge lobes onto the
hinge pins.
Close the boiler door.
SYSTEM DAMAGE
due to leaking burner door.
Tighten the hexagon bolts of the burner
CAUTION!
door evenly.

7.4.4 Fitting the boiler jacket

Installation of the boiler back panel
Screw spacer pins to the rear section.
28 Installation and maintenance instructions Logano G215 US oil/gas-fired boilers • Issue 11/2004
Fig. 32 Hooking on the burner door (here: on the r.h. side)
1 M12 × 25 hexagon bolt
Fig. 33 Spacer pin installation
We reserve the right to make any changes due to technical modifications.