Installation Of Insulation & Boiler Jacket Panels - Buderus G315 Assembly, Maintenance And Operating Instruction

Installation of Insulation & Boiler Jacket Panels
• Secure the lower rear panel with the knock-out
for the drain on the bottom with screws to the
side panels (Fig. 34).
• Snap the bottom of the front panel in the lower
front cover and support it at the top from the
folded edge (Fig. 35).
• Hang the burner door cover into the knock-outs
of the front panel (Fig. 36).
• Secure second rating plate to the side panel for
best viewing.
Lower rear panel
Fig. 34
Front panel
Fig. 35
Burner door cover
Fig. 36
9
Screw
Folded edge
Lower front cover
Rating plate
19