Inserting The Section Sealing; Knock Intermediate Section Into Place - Buderus Logano G215 US Installation And Maintenance Instructions Manual

7 Boiler block assembly

7.1.4 Inserting the section sealing

Unroll the required length of section sealing from the
roll supplied.
SYSTEM DAMAGE
due to leaking boiler sections.
To ensure that the faces between the
CAUTION!
boiler sections are sealed correctly
never stretch the sealing rope during
application.
Carefully insert the sealing rope into the
boiler section packing grooves.
Peel the backing paper from the sealing rope as you
insert the cord into the packing groove.
Insert the flexible sealing rope into the packing
groove starting in the upper boiler hub area, and
lightly press in.
Overlap sealing rope 3/4" at the joins and press in
well.

7.1.5 Knock intermediate section into place

Turn the intermediate section around and locate with
the upper and lower boiler hubs on the nipples of the
rear section.
Drive the intermediate section onto the rear section
using a wood or a rubber mallet.
18 Installation and maintenance instructions Logano G215 US oil/gas-fired boilers • Issue 11/2004
Fig. 9 Inserting the section sealing rope
Fig. 10 Knock intermediate section into place
1 Wood or rubber mallet
2 Rear section
We reserve the right to make any changes due to technical modifications.
1
2