Boiler block assembly
Secure the boiler back panel with nuts to the
threaded and spacer pins.
Installation of the top tie-bar
Secure the top tie-bar with the nuts supplied to the
anchor rod threads.
Fitting the bottom tie-bar
Screw the bottom cross bar with hexagon bolts to the
front section.
We reserve the right to make any changes due to technical modifications.
Installation and maintenance instructions Logano G215 US oil/gas-fired boilers • Issue 11/2004
Fig. 34 Installation of the boiler back panel
1
Fig. 35 Fitting the top tie-bar
1 Anchor rods
Fig. 36 Fitting the bottom cross bar
7
29