Table of Contents
Advertisement
Boiler block assembly
Slightly lift the side panel.
Hook the side panel upper cutout into the upper tie-
bar.
Hook the rear part of the side panel to the extended
hook.
Push against the lower end of the side panel and
secure with the rear panel using the snap nut.
Installing the top front boiler cover
Hook the front boiler cover with its cutout into the
upper tie-bar and push back.
Secure the front boiler cover with two self-tapping
screws to the side panels.
NOTICE
Installation of the back boiler cover
(
Chapter 8.8, page 41).
We reserve the right to make any changes due to technical modifications.
Installation and maintenance instructions Logano G215 US oil/gas-fired boilers • Issue 11/2004
Fig. 40 Slot side panel into place
1 Top tie-bar
2 Extended hook
Fig. 41 Fasten the side panel to the rear panel with screws
1 Snap nut
Fig. 42 Installing the front boiler cover
7
2
1
1
31
Hide quick links:
Advertisement
Table of Contents
