Show Mvr Members - Cisco Catalyst 3750-X Command Reference Manual

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

show mvr members

Use the show mvr members privileged EXEC command to display all receiver and source ports that are

currently members of an IP multicast group.

Syntax Description

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The show mvr members command applies to receiver and source ports. For MVR-compatible mode, all

source ports are members of all multicast groups.

This is an example of output from the show mvr members command:

Switch# show mvr members

MVR Group IP

------------

239.255.0.10

This is an example of output from the show mvr members ip-address command. It displays the

members of the IP multicast group with that address:

Switch# show mvr members 239.255.0.2

239.255.003.--22

Catalyst 3750-X and 3560-X Switch Command Reference

show mvr members [ip-address]

(Optional) The IP multicast address. If the address is entered, all receiver and

source ports that are members of the multicast group appear. If no address is

entered, all members of all Multicast VLAN Registration (MVR) groups are

listed. If a group has no members, the group is listed as Inactive.

Modification

This command was introduced.

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

Gi1/0/1(d), Gi1/0/5(s)

Gi1//1(d), Gi1/0/2(d), Gi1/0/3(d),

Gi1/0/4(d), Gi1/0/5(s)

Catalyst 3560-x