Show Ipv6 Route Updated - Cisco Catalyst 3750-X Command Reference Manual

show ipv6 route updated

show ipv6 route updated
Use the show ipv6 route updated command in user EXEC command to display the current contents of
the IPv6 routing table.
This command is not supported on switches running the LAN base feature set.
Note
Syntax Description
protocol
boot-up
hh:mm
day
month
Command Modes Privileged EXEC
Command History Release
12.2(53)SE2
Catalyst 3750-X and 3560-X Switch Command Reference
2-704
show ipv6 route [protocol] updated [boot-up] {hh:mm | day {month [hh:mm]} [{hh:mm |
day{month [hh:mm]}]
(Optional) Displays routes for the specified routing protocol using any of
these keywords:
•
•
•
•
or displays routes for the specified type of route using any of these keywords:
•
•
•
•
Display the current contents of the IPv6 routing table.
Enter the time as a 2-digit number for a 24-hour clock. Make sure to use the
colons (:). For example, enter 13:32
Enter the day of the month. The range is from 1 to 31.
Enter the month in upper case or lower case letters. You can enter the full
name of the month, such as January or august, or the first three letters of the
month, such as jan or Aug.
Modification
This command was introduced.
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
bgp
isis
ospf
rip
connected
local
static
interface interface id
OL-29704-01