Cisco Catalyst 3750-X Command Reference Manual page 399

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Examples This example shows how to apply a MAC extended ACL named macacl2 to an interface:
Switch(config)# interface gigabitethernet1/0/1
Switch(config-if)# mac access-group macacl2 in
You can verify your settings by entering the show mac access-group privileged EXEC command. You
can see configured ACLs on the switch by entering the show access-lists privileged EXEC command.
Related Commands Command
show access-lists
show mac access-group
show running-config
OL-29704-01
Description
Displays the ACLs configured on the switch.
Displays the MAC ACLs configured on the switch.
Displays the operating configuration.
Catalyst 3750-X and 3560-X Switch Command Reference
mac access-group
2-367