Show Archive Status - Cisco Catalyst 3750-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

show archive status

Use the show archive status privileged EXEC command to display the status of a new image being
downloaded to a switch with the HTTP or the TFTP protocol.
Syntax Description This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines If you use the archive download-sw privileged EXEC command to download an image to a TFTP server,
the output of the archive download-sw command shows the status of the download.
If you do not have a TFTP server, you can use Network Assistant or the embedded device manager to
download the image by using HTTP. The show archive status command shows the progress of the
download.
Examples These are examples of output from the show archive status command:
Switch# show archive status
IDLE: No upgrade in progress
Switch# show archive status
LOADING: Upgrade in progress
Switch# show archive status
EXTRACT: Extracting the image
Switch# show archive status
VERIFY: Verifying software
Switch# show archive status
RELOAD: Upgrade completed. Reload pending
Related Commands Command
archive download-sw
OL-29704-01
show archive status
Modification
This command was introduced.
Description
Downloads a new image from a TFTP server to the switch.
Catalyst 3750-X and 3560-X Switch Command Reference
show archive status
2-563