Show Platform Stp-Instance - Cisco Catalyst 3750-X Command Reference Manual

show platform stp-instance

show platform stp-instance
Use the show platform stp-instance privileged EXEC command to display platform-dependent
spanning-tree instance information.
Syntax Description vlan-id
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Catalyst 3750-X and 3560-X Switch Command Reference
C-38
show platform stp-instance vlan-id
Display spanning-tree instance information for the specified VLAN. The range
is 1 to 4094.
Modification
This command was introduced.
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
OL-29704-01