Show Mac Address-Table Notification - Cisco Catalyst 3750-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

show mac address-table notification

Use the show mac address-table notification user EXEC command to display the MAC address
notification settings for all interfaces or the specified interface.
Syntax Description change
interface
interface-id
mac-move
threshold
Command Modes User EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
Use the show mac address-table notification change command without keywords to see if the MAC
address change notification feature is enabled or disabled, the MAC notification interval, the maximum
number of entries allowed in the history table, and the history table contents.
Use the interface keyword to display the notifications for all interfaces. If the interface-id is included,
only the flags for that interface appear.
Examples
This is an example of output from the show mac address-table notification change command:
Switch> show mac address-table notification change
MAC Notification Feature is Enabled on the switch
Interval between Notification Traps : 60 secs
Number of MAC Addresses Added : 4
Number of MAC Addresses Removed : 4
Number of Notifications sent to NMS : 3
Maximum Number of entries configured in History Table : 100
Current History Table Length : 3
MAC Notification Traps are Enabled
History Table contents
----------------------
History Index 0, Entry Timestamp 1032254, Despatch Timestamp 1032254
MAC Changed Message :
Operation: Added
OL-29704-01
show mac address-table notification {change [interface [interface-id] | mac-move | threshold}
Display the MAC change notification feature parameters and the history
table.
(Optional) Display information for all interfaces. Valid interfaces include
physical ports and port channels.
(Optional) Display information for the specified interface. Valid interfaces
include physical ports and port channels.
Display status for MAC address move notifications.
Display status for MAC-address table threshold monitoring.
Modification
This command was introduced.
Vlan: 2 MAC Addr: 0000.0000.0001 Module: 0
Catalyst 3750-X and 3560-X Switch Command Reference
show mac address-table notification
Port: 1
2-735