show platform ip unicast vrf compaction
show platform ip unicast vrf compaction
Use the show platform ip unicast vrf compaction privileged EXEC command to display the
compaction request queues and compaction status.
Note
This command is not supported on switches running the LAN base feature set.
Syntax Description
There are no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
12.2(53)SE2
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Catalyst 3750-X and 3560-X Switch Command Reference
C-14
show platform ip unicast vrf compaction
Modification
This command was introduced.
Appendix C
Catalyst 3750-X and 3560-X Show Platform Commands
OL-29704-01