Cisco Catalyst 3750-X Command Reference Manual page 1200
Cisco ios release 15.2(1)e and later
Hide thumbs
Also See for Catalyst 3750-X:
- Software configuration manual (1438 pages) ,
- Message manual (150 pages) ,
- Getting started manual (22 pages)
Table of Contents
Advertisement
show platform port-asic
stats {drop | enqueue |
miscellaneous | supervisor}
[asic number | port number
[asic number]]
transmit {port-fifo | queue
| supervisor-sram} [asic
number | port number [asic
number]]
vct [asic number | port
number [asic number]]
version
Though visible in the command-line help strings, the stack {control | dest-map | learning | messages |
Note
mvid | prog-parser | span | stats [asic number | port number [asic number]] keywords are not supported
on switches running the LAN base feature set.
Command Modes
Privileged EXEC
Command History
Release
12.2(53)SE2
Catalyst 3750-X and 3560-X Switch Command Reference
C-30
Appendix C
Display raw statistics for the port ASIC. The keywords have these
meanings:
drop—Display drop statistics.
•
enqueue—Display enqueue statistics.
•
miscellaneous—Display miscellaneous statistics.
•
supervisor—Display supervisor statistics.
•
asic number—(Optional) Display information for the specified
•
ASIC. The range is 0 to 1.
port number—(Optional) Display information for the specified port
•
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
Display transmit information. The keywords have these meanings:
port-fifo—Display the contents of the port-FIFO information
•
register.
queue—Display the contents of the queue information register.
•
supervisor-sram—Display supervisor SRAM information.
•
asic number—(Optional) Display information for the specified
•
ASIC. The range is 0 to 1.
port number—(Optional) Display information for the specified port
•
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
Display the VLAN compression table entries for the specified ASIC or
for the specified port and ASIC. The keywords have these meanings:
asic number—(Optional) Display information for the specified
•
ASIC. The range is 0 to 1.
port number—(Optional) Display information for the specified port
•
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
Display version and device type information for port ASICs.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Show Platform Commands
OL-29704-01
Advertisement
Table of Contents
