Show Controllers Ethernet Phy Macsec - Cisco Catalyst 3750-X Command Reference Manual

show controllers ethernet phy macsec

show controllers ethernet phy macsec
Use the show controllers ethernet phy macsec privileged EXEC command to display the internal
Media Access Control Security (MACsec) counters or registers on the switch or the specified interface.
Syntax Description interface-id
counters
registers
Command Modes
Privileged EXEC
Command History Release
12.2(53)SE2
Usage Guidelines
The displayed information is useful s for Cisco technical support representatives troubleshooting the
switch.
Examples
This is an example output from the show controllers ethernet phy macsec counters command:
Switch# show controllers ethernet g1/0/1 phy macsec counters
GigabitEthernet1/0/1 (gpn: 1, port-number: 1)
-----------------------------------------------------------
========== Active RX SA ==========
ILU Entry
SCI
AN
NextPN
Decrypt Key
---------- RX SA Stats ----------
IGR_HIT
IGR_OK
IGR_UNCHK
IGR_DELAY
IGR_LATE
IGR_INVLD
IGR_NOTVLD
========== Active TX SA ==========
ELU Entry
SCI
AN
NextPN
Encrypt Key
Catalyst 3750-X and 3560-X Switch Command Reference
2-600
show controllers ethernet [interface-id] phy macsec {counters | registers}
(Optional) The physical interface.
Displays the status of the internal counters on the switch physical layer device
(PHY) for the device or the interface.
Displays the status of the internal registers on the switch PHY for the device or
the interface.
Modification
This command was introduced.
: 1
: 0x1B2140EC4C0000
: 0x0000
: 0x0013
: 0x1E902BE3AF08549BAC995474C5F55526
: 0xE
: 0xE
: 0x0
: 0x0
: 0x0
: 0x0
: 0x0
: 2
: 0x22BDCF9A010002
: 0x0000
: 0x0022
: 0x1E902BE3AF08549BAC995474C5F55526
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-29704-01