Show Vlan - Cisco Catalyst 3750-X Command Reference Manual

Cisco ios release 15.2(1)e and later
Hide thumbs Also See for Catalyst 3750-X:
Table of Contents

Advertisement

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

show vlan

Use the show vlan user EXEC command to display the parameters for all configured VLANs or one
VLAN (if the VLAN ID or name is specified) on the switch.
Syntax Description
brief
dot1q tag native
id vlan-id
internal usage
mtu
name vlan-name
private-vlan
type
remote-span
summary
Though visible in the command-line help string, the ifindex keyword is not supported.
Note
Command Modes
User EXEC
Command History
Release
12.2(53)SE2
OL-29704-01
show vlan [brief | dot1q tag native | id vlan-id | internal usage | mtu | name vlan-name |
private-vlan [type] | remote-span | summary]
(Optional) Display one line for each VLAN with the VLAN name, status,
and its ports.
(Optional) Display the IEEE 802.1Q native VLAN tagging status.
(Optional) Display information about a single VLAN identified by VLAN ID
number. For vlan-id, the range is 1 to 4094.
(Optional) Display a list of VLANs being used internally by the switch.
These VLANs are always from the extended range (VLAN IDs 1006 to
4094), and you cannot create VLANs with these IDS by using the vlan
global configuration command until you remove them from internal use.
(Optional) Display a list of VLANs and the minimum and maximum
transmission unit (MTU) sizes configured on ports in the VLAN.
(Optional) Display information about a single VLAN identified by VLAN
name. The VLAN name is an ASCII string from 1 to 32 characters.
(Optional) Display information about configured private VLANs, including
primary and secondary VLAN IDs, type (community, isolated, or primary)
and ports belonging to the private VLAN. This keyword is only supported if
your switch is running the IP services feature set.
(Optional) Display only private VLAN ID and type.
(Optional) Display information about Remote SPAN (RSPAN) VLANs.
(Optional) Display VLAN summary information.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show vlan
2-823

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3560-x

Table of Contents