Aclmgr Messages - Cisco 3845 - Security Bundle Router Manual

Chapter 2 Messages and Recovery Procedures

ACLMGR Messages

Error Message ACLMGR-2-NOMAP: Cannot create ACL Manager data structures for VLAN Map
[chars].
Error Message ACLMGR-2-NOVLB: Cannot create memory block for VLAN [dec].
Error Message ACLMGR-2-NOVMR: Cannot generate hardware representation of access list
[chars]
Error Message ACLMGR-3-ACLTCAMFULL: Acl Tcam Full. Drop packets on Output Acl label
[dec] on [chars] [chars].
Error Message ACLMGR-3-AUGMENTFAIL: Augmenting of access-map [chars] on [chars]
label [dec] failed.
OL-23408-01
The ACL manager could not allocate the data structures needed to describe a VLAN
Explanation
map into a form that can be loaded into hardware. This error is most likely caused by lack of free
memory. [chars] is the VLAN map name.
Reduce other system activity to ease memory demands.
Recommended Action
Explanation The ACL manager could not save per-VLAN information needed for its correct
operation. Some per-interface features, such as access groups or VLAN maps, will not be configured
correctly. [dec] is the VLAN number.
Recommended Action Change configuration to reduce memory usage.
Available resources are not sufficient to create a hardware representation of the ACL. A
Explanation
lack of available logical operation units or specialized hardware resources can cause this problem.
Logical operation units are needed for a TCP flag match or a test other than eq (ne, gt, lt, or range)
on TCP, UDP, or SCTP port numbers.
Modify the ACL configuration to use fewer resources, or rename the ACL with
Recommended Action
a name or number that alphanumerically precedes the other ACL names or numbers.
Explanation The platform-specific ACL TCAM cannot support the number of configured ACLs.
[dec] is the label number, and [chars] represents the layer. The first [chars] is Layer 3, and the second
[chars] is Layer 2. If only one layer of TCAM is full, only one string is displayed, and the other
string is NULL.
Reduce the number of IP or MAC access lists to be applied to interfaces.
Recommended Action
The system ran out of CPU DRAM when trying to merge internally required elements
Explanation
with the configured access maps. The first [chars] is the access-map name, the second [chars] is the
direction in which the map was applied (input or output), and [dec] is the label number.
Reduce other system activity to ease memory demands.
Recommended Action
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
ACLMGR Messages
2-3