Ethernet Cable Connection - Xerox DocuColor 4 Administrator's Manual

1.5
The DocuColor 4 LP/CP supports Ethernet cabling of three types:
1
• Thinnet (thin coaxial Ethernet cable or 10Base2)
• Thicknet (thick coaxial Ethernet cable or 10Base5)
• Unshielded Twisted Pair (UTP), defined as Category 5 for use with
The 100BaseT type supported by the DocuColor 4 LP/CP is 100BaseTX, also
known as Fast Ethernet. If an Ethernet hub is used, it must be a 100BaseTX
hub. The term "100BaseT" is used in this manual to refer to 100BaseTX.
10/100BaseT connector for
twisted pair Ethernet connection
AUI connector for thicknet
Ethernet connection
Parallel connector
12

Ethernet cable connection

Uses an external transceiver to attach to the AUI (attachment unit inter-
face) connector on the Ethernet interface of the DocuColor 4 CP.
Connects directly to the AUI connector on the Ethernet interface of the
DocuColor 4 LP/CP.
100BaseT or defined as Category 3 or Category 5 for use with 10BaseT
Uses an 8-pin RJ-45 connector that plugs into the RJ-45 socket on the
DocuColor 4 LP/CP.
Unshielded Twisted Pair is also used for Token Ring.
Back view of the DocuColor 4 LP