Table of Contents
Advertisement
MIDI Implementations
Model : VR-3
Version : 1.00
Date : December 10. 2011
Symbol
Item
————————————————————————————————————————————
n :
MIDI Channel
vv :
Control Value, Velocity Value etc.
kk :
Note Number
xx :
Turning ON/OFF
————————————————————————————————————————————
1. MIDI Messages Received at MIDI IN
1-1. Standard Mode
* If [OFF] is selected as STD:Rx CHANNEL value, the following channel voice messages will not be received.
■ Channel Voice Messages
● Note On
Status
2nd Byte
———-
———
9nH
kkH
* This is received when the VIDEO SEL TYPE is [AR].
* In combination with program change, this switches the video input to the channel corresponding to the note number.
* Unselectable note number or velocity will be ignored.
* For corresponding combination of program change/note number and the video channels, refer to "STD:VIDEO SEL TYPE" (p. 4).
● Control Change
❍Bank Select (Controller Number 0,32)
Status
2nd Byte
———-
———
BnH
00H
BnH
20H
mm,ll = Bank Number : 00 00H, 01 00H (Main, Composition)
* This is received when the VIDEO SEL TYPE is [VLINK].
* You can select a channel for main video input or a channel for composition.
* Unselectable bank select will be ignored and only the program change will be received.
* The received bank select information will be kept until a new bank select message is received.
* For corresponding combination of bank select/program change and the video channels, refer to "STD:VIDEO SEL TYPE" (p. 4).
❍Panpot (Controller Number 10)
Status
2nd Byte
———-
———
BnH
0AH
* This controls [1] slider of the audio mixer.
❍Expression (Controller Number 11)
Status
2nd Byte
———-
———
BnH
0BH
* This controls [2] slider of the audio mixer.
1Setting Range
0H-FH(ch.1 - ch.16)
00H-7FH(0 - 127)
(If note on velocity, it changes to 01H-7FH(1 - 127).)
(If there is a center value, 40H(64) should be the center.)
00H-7FH(0 - 127)
00H-3FH(0 - 63) : OFF
40H-7FH(64 - 127) : ON
3rd Byte
———
vvH
3rd Byte
———
mmH
llH
3rd Byte
———
vvH
3rd Byte
———
vvH
9
Advertisement
Table of Contents
