Saving/Recalling Settings; Returning To The Factory-Default State; Switching Between Ntsc And Pal - Roland VR-3 Owner's Manual

Saving/Recalling Settings

The [MEMORY] item at the [SYSTEM] menu lets you save and call up the panel state and various settings.
* For information on the various items, refer to "SYSTEM Menu" (p. 47).
• SAVE SETTING This saves the current settings and panel state to the internal memory.
• LOAD SETTING This calls up saved settings and panel state.
• POWER ON LOAD This automatically calls up saved settings and panel state at startup.
You can save eight sets of settings to the internal memory. Use [SAVE SETTING], [LOAD SETTING], and [POWER ON LOAD] to select a number from
1 to 8.

Returning to the Factory-default State

This returns various settings to their factory defaults.
1.
Access the menu.
Press the [MENU] button to access the menu screen.
2.
Display the SYSTEM menu.
Touch the [SYSTEM] icon to display system-related menus.
fig.system-menu.eps
3.
Select [Factory Reset].
Choose [SETUP] to display various setting menus. Then select [FACTORY RESET].
fig.fac-reset.eps
4.
Return the unit to its factory-default state.
Selecting [FACTORY RESET] makes a confirmation screen appear. Pressing the [VALUE] dial at the confirmation screen returns the
unit to its factory-default state.
Returning the unit to its factory-default state also deletes all settings saved to internal memory.

Switching Between NTSC and PAL

Go to the [SYSTEM] menu and use [NTSC/PAL] to select [NTSC] or [PAL]. Restart the VR-3 to switch NTSC/PAL
Images will not be display correctly if the setting on the VR-3 differs from the signals of the connected external equipment.
Using Other Features
43