Rear Panel/Side Panel (Connecting Your Equipment) - Roland V-02HD Startup Manual

Operating Guide (Panel Descriptions)

Rear Panel/Side Panel (Connecting Your Equipment)

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before
making any connections.
DC IN jack
Connect the included AC adaptor to this jack.
* Use the cord hook to secure the cord of the AC
adaptor as shown in the illustration.
Cord hook
* Place the AC adaptor so the side with the indicator
(see illustration) faces upwards and the side with
textual information faces downwards. The indicator
will light when you plug the AC adaptor into an AC
outlet.
Power cord
to an AC outlet
Ground terminal
Connect this to an external earth or ground
if necessary.
O
USB ( ) port
Connect your computer here. This is used
when backing up the unit's settings, or when
updating the system program.
CTL/EXP jack
(TRS phone)
Connect an expression pedal (sold separately: EV-5, etc.) or
footswitch (sold separately: BOSS FS-6, etc.). This is used when
using your foot to control operations such as video switching.
* Use only the specified expression pedal (EV-5, BOSS FV-500L, or
FV-500H sold separately). By connecting any other expression
pedals, you risk causing malfunction and/or damage to the unit.
4
Indicator
AC adaptor
USB 2.0 port
PROGRAM OUT connector
This outputs the resulting mixed video (the program
video). Here you can connect a display, projector, or
video recorder that is equipped with an HDMI input
connector.
USB 2.0 cable
PREVIEW OUT connector
This outputs the preview video (the standby
video). Connect this to a display that is
equipped with an HDMI input connector.
5
T
he V-02HD menu is shown on the display
that's connected to the PREVIEW OUT
connector.
HDMI input
connector
HDMI cable
HDMI cable
HDMI input connector